CEILING MICROPHONE & LINE ARRAY SPEAKER SOLUTION  ยี่ห้อ YAMAHA รุ่น ADECIA Ceiling

Specifications

RM CG GENERAL

• Description    :  Ceiling Microphone
• Color   :  Black, White
• Dimensions (WxDxH)  :  W560×D560mm×H90mm（including protrusions／microphone panel: H22mm)
• Weight  :  5.6kg
• Power requirements   :  PoE(IEEE 802.3af), DC 48V
• Maximum Power Consumption   :   7.2 W
• In Operation  :  Temperature 0℃～40℃ Humidity 30%～90% (No condensation)
• Storage   :  Temperature -20℃～60℃ Humidity 20%～90% (No condensation)
• Indicator   :  Front Indicator(Mute/Unmute & Status) ・Network Port Indicator
• Mount   :   Ceiling Mount (*can’t replace a grid ceiling panel.) Wire hanging VESA mount
• Max device number with RM-CR   :  4 (Connection with other than RM-CR is not limited to this device)
• Accessories   :  Construction description, (Guarantee), grillex1, screws for grille (M3x8mm)x5(*), screw coverx4, cutting template x1, Cringx1, screws for C ring x2, hanger anglex1, screws for hanger angle(M4x20mm)x5(*), terminal coverx1, safety wire x1,binding bandx1, clamp platex2 (*)including a spare respectively
• Dust Protection   :   IP5X for dust protection（with junction cover）
• Plenum Rating   :   UL2043（with junction cover）

RM-CR NETWORK SPECIFICATIONS

• Ether1   :   Dante Audio/Dante Control, Remote Control, WebUI, PoE+
• Ether2/Ether3   :  Corporate Network, Remote Control, SIP, WebUI
• USB Network (Front)   :   USB2.0, Network Class, WebUI, Fixed IP
• Cable requirements   :  Ether1/2/3 : Cate 5e or higher (STP Recommended) USB Network : USB Cable (A-microB type)

RM-CR AUDIO SPECIFICATIONS

• Frequency response  :   20Hz – 20kHz
• Sampling Rate  :   48kHz
• Bit depth  :   24bit
• Latency   :   8 [ms] (Dante In to USB Out, includes signal processing)
• Dante   :  16in x 16out
• USB   :   USB2.0, Audio Class 1.0 Input: 2ch, Output: 2ch @48kHz
• Mic Input   :   XLR balanced, Input 2ch
• AUX  :  RCA unbalanced (Line Level), Input: 2ch, Output: 2ch
• Speaker Out   :   RCA unbalanced (Line Level), Output: 2ch
• Bluetooth   :   Version 4.2 Supported profiles: HFP(1.6), A2DP, AVRCP Supported codec: CVSD, SBC, mSBC Wireless output: Class2 Maximum communication distance: 10m (32.8 ft) (no obstacles) Radio frequency (operational frequency): 2,402 to 2,480 MHz Maximum output power (EIRP): 4.0 dBm (2.5 mW)
• SIP   :   Dial, Answer, Hold, Resume, Forwarding, Do not disturb, Call ID, Voice Mail Notifications (switch configured) Call Bridging Supports Bridging SIP, USB, BT and AUX Calls. Join, Split, Hold, Resume, 5+1 Lines: Up to 2 SIP calls, 1 USB call, 1 Bluetooth Call, 1 AUX, plus the user Codecs G.711, G.722HD, G.729ab, G.726 DTMF Support RTP event, SIP in-band, SIP info package Security SRTP Support (RFC 1889), IETF SIP support (RFC 3261 and companion RFCs)

RM – CG NETWORK SPECIFICATIONS

• Ether1   :   Dante Audio/Dante Control, Remote Control, WebUI, PoE
• Cable requirements   :   Cat 5e or higher (STP Recommended)

RM – CG AUDIO SPECIFICATIONS

• Frequency response   :   160Hz – 16kHz(-10dB)
• Sampling Rate   :   48kHz
• Bit depth   :   24bit
• Latency   :  58 [ms] (including signal processing)
• Audio I/O Dante   :   1in x 2out 　In1=AEC reference signal／Out1=output of beam mix, Out2= output of beam mix（simple processed）
• Maximum input level of SPL（0dB   :   117.8 dB SPL
• Self Noise   :   -0.8 dBA SPL
• SNR(Ref. 94 dB SPL at 1 kHz   :   94.8 dBA
• Sensitivity   :   -23.8 dBFS/Pa
• Dynamic Range    :   118.6 dBA
• Signal Processing   :   Multi beam tracking, Adaptive Echo Canceler，Noise Reduction, Dereverberation，Auto Mixer, Auto Gain Control，Parametric EQ，Output Gain

RM-CR GENERAL

• Description   :   Signal Processor
• Dimensions (WxDxH)  :   W215mm×D260×H44mm
• Weight   :   1.6kg
• Power requirements   :   PoE+(IEEE 802.3at, LLDP), DC 48V
• Maximum Power Consumption   :   15.0W
• In Operation   :   Temperature 0℃～40℃ / Humidity 30%～90% (No condensation)
• Storage   :   Temperature -20℃～60℃ / Humidity 20%～90% (No condensation)
• Indicator   :  Power Indicator ・Status Indicator ・Bluetooth Indicator ・Network Port Indicator（x3）
• Accessories   :   Installation Manual, USB Cable (A-B) 5 m (16.4 ft), USB Cable (A-microB) 1 m (3.3 ft), 4x Rubber foot, Access Panel
• Mount  :  Table Mount, Rack Mount
• Connector   :   RJ 45, USB, XLR balanced, RCA
• Maximum Device with RM-CR    :   –
• Options   :   RM-MTL: Table Mount Kit, RM-MRK: Rack Mount Kit

RM-CR INPUT/OUTPUT CHARACTERISTICS

• Input Terminal   :   MIC IN 1,2 / AUX IN L,R
• Input Level   :  Nominal -46dBu -14dBu / Max. before clip -26dBu +6dBV / Connector XLR-3-31 (Balanced)/ RCA PIN
• Output Terminal   :   AUX OUT L,R / SP OUT L,R
• Source Impedance   :   1kΩ
• For Use with Nominal   :  10kΩ
• Output Level   :   Nominal -14dBV / Max. before clip +6dBV / Connector RCA PIN